Thursday, June 5, 2008

Waste Reduction - Composting: eaiser than you think..

When I talk to folks about composting, they usually associate the following words with the process: ugly, smelly, difficult. When done properly- composting is pretty easy to do, and yields fantastic results (lots of rich compost for your landscaping or garden)!

There are many guides on composting on the net, but in a nutshell, there are 5 things you need to manage when composting:
  • Green stuff (1 part, provides nitrogen)
  • Brown stuff (1 part, provides carbon)
  • Water (not too much!)
  • Air (no too little!)
  • Contact with Soil, or compost starter (for the microorganisms and insects that do the job)
Not too hard, but lets take a closer look at what you need:

-Green stuff is most everything plant that comes from the kitchen and the yard or garden. Compost bins can't handle fats, oils, or any animal waste products- so no table scraps, or meat.

-Brown stuff is usually dried up plant matter like brown leaves, straw, small twigs, shredded paper (yes your paper was once a plant).

-The compost heap, or 'pile' should be moist, but not wet. The feeling of a wrung-out sponge is about right.

-Air is important to allow the pile to breath, which prevents anaerobic bacteria from doing their work, which creates nasty those nasty odors. Too much air and your pile can dry out, slowing the composting process.

-Direct soil contact is preferred so microbes and critters can crawl up into the pile and do their work, but compost starters can be purchased for more isolated piles.


If you want to help the process along, the smaller you chop up your compost-ables, the quicker they will break down. I'm lazy, so I dump my larger organic matter in the bin without much or any cutting, and let nature do the dirty work of breaking it down. This works for almost everything, except for large tubers- they seem to love being stored in compost (it is like a root cellar), and I have recovered what I think are beets that have been in a bin for 6 months and still looked healthy and almost edible.

The city adds one extra challenge: rats. Rats love any kitchen scraps, so a rat-safe (read: Fort Knox) compost bin is required in the city.. In fact it is the law! Because of this, it is hard to build your own rat-safe composter, and best to purchase the model the city distributes: the Earth Machine.



Lucky us, the city is making these bins available to residents at a discounted price.
The next event where a compost bin can be purchased is:

UPDATE: This event is over, please find upcoming event info HERE

Saturday June 21st
8AM -3PM
US Cellular field
333W 35th Street

30$ for Earth Machine Compost Bins, which include a 10 year warranty for missing / broken parts (you only pay shipping) from the manufacturer.

For more details, please see Chicago Energy Consultants existing post on the June 21st City of Chicago Environmental Resource Event

2 comments:

William Jessie said...
This comment has been removed by the author.
Anonymous said...

The typical turnaround for injection molding varies precision machining between 6-10 weeks. 4-6 weeks to manufacture the mildew, plus 2-4 extra weeks for manufacturing and shipping. If design modifications are required the turnaround time increases accordingly. A key strength of injection molding is may possibly} produce completed merchandise that need little to no extra ending. The surfaces of the mildew can be polished to a very high degree to create mirror-like parts. The SPI requirements dictate the level of ending might be} achieved.